Download Downloadable - LaserSoft Imaging
Transcript
Calibrating an RGB printer using SilverFast Ai IT8 PrinterCalibration Output/printer calibration is the final step in ensuring for color consistency and replicability in the workflow. A flat bed scanner is used as a measuring device. Printer calibration is an option in SilverFast Ai IT8/AiIT8 Studio for many scanners. Workflow of printer calibration 1. Printer preparation Clean ink jets, insert paper Note down the optimal printer driver and paper settings 2. Scanner preparation Perform IT8 calibration 3. Launch printer profiling wizard Enter printer and paper details Click on “Print printer-profiling target” De-activate the printer’s internal color management (Important !) Select paper type settings Print the profiling target 4. Let the printer target dry! (See paper manufacturer’s instructions “optimal dry time”) 5. If needed, re-launch the printer profiling wizard Prepare scanner Warm up the lamp, position the target and additional pieces of the same paper on the scan bed. Scan the target Measure the target Name and save the ICC profile Keep the target safe in the paper box 6. Test the ICC profile and adjust it with the profile editor, if necessary 20