Download Downloadable - LaserSoft Imaging

Transcript
Calibrating an RGB printer using SilverFast Ai IT8 PrinterCalibration
Output/printer calibration is the final step in ensuring for color consistency and replicability
in the workflow. A flat bed scanner is used as a measuring device. Printer calibration is an
option in SilverFast Ai IT8/AiIT8 Studio for many scanners.
Workflow of printer calibration
1. Printer preparation
Clean ink jets, insert paper
Note down the optimal printer driver and paper settings
2. Scanner preparation
Perform IT8 calibration
3. Launch printer profiling wizard
Enter printer and paper details
Click on “Print printer-profiling target”
De-activate the printer’s internal color management (Important !)
Select paper type settings
Print the profiling target
4. Let the printer target dry! (See paper manufacturer’s instructions
“optimal dry time”)
5. If needed, re-launch the printer profiling wizard
Prepare scanner
Warm up the lamp, position the target and additional pieces of the same paper on the scan bed.
Scan the target
Measure the target
Name and save the ICC profile
Keep the target safe in the paper box
6. Test the ICC profile and adjust it with the profile editor, if necessary
20