Download T23 Fleet Installation Guide
Transcript
Installation Guide Problem: Vehicle shows as parked, but its moving Possible Cause: Your T23 Series will report a state of Parked when a Trip has not been started which takes 300m, so if a FIND or any other report is received during this time, it will show the vehicle as “Parked”. Resolution: None. Once a Trip Start is detected, the vehicle state will change to moving or stopped As Tramigo constantly strive to improve products, all specifications are subject to change without notice. The information provided herein is believed to be correct at the time of going to press. © 2007 - 2014Tramigo™ Ltd. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of Tramigo™. Page 30 of 30