Download Studer Infinity Core - HARMAN Professional

Infinity Core
Setting up the Infinity Core
Setting up a Infinity Core is done by using the browser based “Infinity Panel”
- which normally is started from the Vista desk.
Any Web browser can be started and the address of the core can be entered :
192.168.1.42:4000 (e.g. as this is the default address).
Then, the Infinity Panel appears - if the desk is connected to the core - and
the following five menu items can be accessed :
Settings, Network, Software, Control and Log
Settings
On this page, the below described parameters are shown. All of these parameters can also be edited on this page :
Node Name
Cloud Id
Node Id
Communication Port
Use Multicast
Multicast Group Address
Log level
The name of this Infinity Core - e.g. Main Core or Redundant Core.
The Cloud Id of the Mixer Cloud.
The Node Id of this Infinity Core.
As a default, the communication Port for the communication with Cores is
Port 3000.
This enables to use IP multicast group communication, making use of the
UDP protocol.
Here the IP multicast group address is defined. As a default, the Multicast
Group Address for the communication with Cores is 239.255.42.1 .
Here the level of details about the logged information is set. The dropdown
menu allows the shown choice. (Infomation being the default setting).
14 Infinity Core
Document generated: 18.03.15