Download Studer Infinity Core - HARMAN Professional

Safety Information
For Your Own Safety and to Avoid Invalidation of the Warranty
Please Read This Section Carefully
•
•
•
•
•
•
•
Read these instructions
Keep these instructions
Heed all warnings
Follow all instructions
Do not use this apparatus near water
Clean only with a dry cloth
Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions
• Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat
• Do not defeat the safety purpose of a polarised or grounding type plug. A
polarised plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wide blade or
the third prong are provided for your safety. If the provided plug does not
fit into your outlet, consult an electrician for replacement of the obsolete
outlet
• Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles and the point where they exit from the
apparatus
• Only use attachments/accessories specified by the manufacturer
• Use only with the cart, stand, tripod, bracket or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from
tip-over
• Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as the power
supply cord or plug is damaged, liquid has been spilled or objects fallen
into the apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped
Note: It is recommended that all maintenance and service on the product
should be carried out by Studer or its authorised agents. Studer cannot
accept any liability whatsoever for any loss or damage caused by service,
maintenance or repair by unauthorised personnel
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus
to rain or moisture. Do not expose the apparatus to dripping or splashing
and do not place objects filled with liquids, such as vases, on the apparatus
• No naked flame sources, such as lighted candles, should be placed on the
apparatus
• Ventilation should not be impeded by covering the ventilation openings
with items such as newspapers, table cloths, curtains etc
WARNING: Do not use this apparatus in very dusty atmospheres, or in atmospheres
containing flammable gases or chemicals
• THIS APPARATUS MUST BE EARTHED. Under no circumstances
should the safety earth be disconnected from the mains lead
• The mains supply disconnect device is the mains plug. It must remain
accessible so as to be readily operable when the apparatus is in use
• If any part of the mains cord set is damaged, the complete cord set should
be replaced. The following information is for reference only. The wires
in the mains lead are coloured in accordance with the following code:
I