Download User`s Manual

Transcript
Features
General
•
•
•
•
•
•
•
•
•
Connect up to your Kantronics KPC-3x TNC or any TNC2 compatible clone and GPS
Automatic GPS detection, and on-screen warnings when GPS is not present or out-oflock Position data can come from a GPS ($GPRMC sentence), or be entered manually.
4-line x 20-char display, ordered as "My Data" (line 1), "Auxillary Display" (line2), and
"Others Data" (lines 3 & 4)
"Whiz Wheel" Single knob with button. Intuitive control of: settings, functions, and
data entry
"BEEPER" to indicate incoming messages and mode changes
Tricolor LED indicating XMIT, DIGIPEAT, and RX; Green LED for TNC's "CD"
indicator
Displays most APRS® data, including posits, messages, weather, status, GPGGA,
GPRMC, TH-D7A / TMD700 / / PIC-E / MIC-E, APRS objects, etc;
Handles ANY packet; prints raw data of any packet it does not understand (no
"??KA9MVA" like the Kenwood radios!)
Reload firmware and customize settings using your PC!
APRS-Network-Related
•
•
•
•
•
•
•
•
•
SmartBeaconing (tm) controls beaconing according to speed, cornering, and network
activity.
TOTALLY TUNABLE parameters - works for anything from automobiles to
zeppelins!
'='-style posits for beacons, or use $GPRMC strings, your choice
DigiMetertm tells how well you're getting in, and through which digipeaters
Status: select one of 6 editable status strings to transmit at a selectable interval
APRS queries (stores 6, up to 20 characters each). Find other stations, weather stations,
IGATES, etc.!
Responds to queries: ?APRS? and ?HUDS?
UNPROTO: Three, 20-character, editable paths. Destination address (e.g., CQ, APHH2,
SPCL, etc.) is editable. MYCALL is editable. All UNPROTO changes take effect
immediately.
Control your TNC! Send arbitrary commands (stores 6, up to 20 characters each) to
adjust other TNC parameters, even on the go!