Download User`s Manual
Transcript
Features General • • • • • • • • • Connect up to your Kantronics KPC-3x TNC or any TNC2 compatible clone and GPS Automatic GPS detection, and on-screen warnings when GPS is not present or out-oflock Position data can come from a GPS ($GPRMC sentence), or be entered manually. 4-line x 20-char display, ordered as "My Data" (line 1), "Auxillary Display" (line2), and "Others Data" (lines 3 & 4) "Whiz Wheel" Single knob with button. Intuitive control of: settings, functions, and data entry "BEEPER" to indicate incoming messages and mode changes Tricolor LED indicating XMIT, DIGIPEAT, and RX; Green LED for TNC's "CD" indicator Displays most APRS® data, including posits, messages, weather, status, GPGGA, GPRMC, TH-D7A / TMD700 / / PIC-E / MIC-E, APRS objects, etc; Handles ANY packet; prints raw data of any packet it does not understand (no "??KA9MVA" like the Kenwood radios!) Reload firmware and customize settings using your PC! APRS-Network-Related • • • • • • • • • SmartBeaconing (tm) controls beaconing according to speed, cornering, and network activity. TOTALLY TUNABLE parameters - works for anything from automobiles to zeppelins! '='-style posits for beacons, or use $GPRMC strings, your choice DigiMetertm tells how well you're getting in, and through which digipeaters Status: select one of 6 editable status strings to transmit at a selectable interval APRS queries (stores 6, up to 20 characters each). Find other stations, weather stations, IGATES, etc.! Responds to queries: ?APRS? and ?HUDS? UNPROTO: Three, 20-character, editable paths. Destination address (e.g., CQ, APHH2, SPCL, etc.) is editable. MYCALL is editable. All UNPROTO changes take effect immediately. Control your TNC! Send arbitrary commands (stores 6, up to 20 characters each) to adjust other TNC parameters, even on the go!