Download SCADAPack E Technical Overview

SCADAPack E Technical Overview
5.1.1
RTU Features
The SCADAPack E RTU hardware provides a wide range of facilities.
Choice of I/O technology, I/O Boards and I/O expansion options
Input power supply options (various technologies and voltage ranges available)
Input power supply voltage monitoring
Boot Monitor for local / remote re-programming of Operating System Firmware
Hardware Watchdog
Serial Communication Ports
USB Communication Port (some models)
Flash ROM and NV RAM
Replaceable Lithium Battery
Ethernet support : UTP
Dual Ethernet interfaces (some models)
Isolated secondary output power supply (some models)
SCADAPack E RTU I/O Interface features: (varies from model to model)
Optically isolated Digital Input channels (some models)
Pulse inputs on Digital Input channel (some models)
De-bounce and Inversion on each Digital Input channel (some models)
High speed counter inputs
Relay Isolated Digital Output channels (some models)
Digital Output channel Relay feedback (some models)
Current / Voltage Analog Inputs selectable per channel (some models)
Channel-to-Channel and Channel-to-Logic isolated Analog Input channels (some models)
Channel-to-Channel and Channel-to-Logic isolated Analog Output channels (some models)
A/D converter reference check (some models)
LED’s on the Processor Boards and I/O Boards provide visual indication of RTU operation. These
indicate:
Energized Digital Input channels
Activated Digital Output relays
Controller running
DNP3 Network communications activity
SCADAPack ES Remote I/O communication activity (some models)
PLC device communication activity
19