Download SCADAPack E Technical Overview

74
12.4
SCADAPack E Technical Overview
Local & Remote I/O Status
Local I/O Status
The following RTU system points are provided to indicate operational status of local RTU I/O.
Local I/O Module Failure
Local Input Power Supply Low
Local On-Board Battery Low
Local Calibration Parameters Invalid
Local Input Supply Voltage
I/O Card Status (SCADAPack ER only)
Refer to the SCADAPack E Operational Reference manual for details of these status system points.
Remote I/O Status
The following RTU system points are provided for operational status indication on the Main RTU and for
each Remote I/O Unit.
Remote I/O Module Failure
Remote Input Power Supply Low
Remote On-Board Battery Low
Remote Calibration Parameters Invalid
Refer to the SCADAPack E Operational Reference manual for details of these status system points.