Download micromesh-heat tutorial 2003 ic
Transcript
CFD-ACE+ 2003 : Integrated Circuit (IC) Thermal Analysis Tutorial ____________________________________________________________________________________ Viewing the Generated 3D Computational Mesh (DTF file) 27. Select the CFD-VIEW button [ ] from the toolbar. This button invokes the CFD-VIEW program installed on your machine as part of the CFDRC software. The DTF file just generated by CFD-Micromesh is opened automatically in CFD-VIEW. Please refer to the CFDVIEW Manual from CFDRC for all the details of operation of this program. • In CFD-VIEW (as shown in image below): In the bottom right panel, select all the interfaces (holding shift or ctrl key enables multiple selections) Along the top toolbar, check the Grid On [ ] and Surface On [ ] buttons. The grid is visible on all interfaces in the geometry. Note that interfaces were selected so that the internal geometry could be visualized with relative ease. The grid may be inspected in detail by rotating (LB), zooming (MB), and panning (RB) the geometry. Grid On Surface On Select All Interfaces Rotate and Zoomed 3D View Zoomed Top-Down View 21