Download Target Settings

Transcript
Debugging
Command Converter Server
Figure 8.10
Command Converter Server Menu
2. Select Show console from the menu.
3. The Metrowerks Command Converter Server window appears
(Figure 8.11):
Figure 8.11
Metrowerks Command Converter Server Window
4. On the console command line, type the following command:
delete all
5. Press Enter.
6. Type the following command, substituting the number of the
parallel port to use (for example, 1 for LPT1):
config cc parallel:1
7. Press Enter.
DSP–194
Targeting DSP56800