1
Download "user manual"
Transcript
12 Figure 12-29 Wire Load Model Logical Hierarchy Top A 5K gates B 20K gates C 45K gates Wire Table List Physical Hierarchy A B C Wire table capacitance aplied to all nets in block Different wire load models are applied to the individual subblocks of a design that correspond to the physical hierarchy. Low-level hierarchical blocks are often “dissolved” into higher level blocks during floor planning. Use the following command to set the wire table for a block: > report_wire_tables -summary > set wire_table cg61_5000area 12-50 LeonardoSpectrum User’s
