Download Net Commander Manual

Transcript
Appendix
A
CHANGING SCREEN RESOLUTION
Net Commander requires that a screen resolution of 1024 x 768 or better be used in order to be viewed
properly. Using a resolution that is less than 1024 x 768 like for instance 800x 600 will lessen your Net
Commander experience. Conversely, the higher the resolution that the computer is set to, the better the
viewing experience because Net Commander has more real estate on the monitor to work.
To change your computers resolution, click on Start Control Panel and then open up the Display
Properties window by double clicking on the Display Icon. At the top of the Display Properties window
are tabs. Click on the tab that says Settings.
Circled in red, in Figure 52, is the Screen Resolution
area of the Display Properties, click (and hold down the
and drag the Slider to the desired
click) on the slider
screen resolution. The currently selected screen
resolution will be display as numbers just below the
Slider. Click on Apply to save the changes.
Figure 52 – Display Properties
Windows will allow you to preview the new
resolution prior to saving your changes. A
display prompt like the one in Figure 53 will
appear. Click on Yes to save your settings or
click on No to cancel. If the Display
Properties window is still open, then click on
Ok and that will close the window
Figure 53 – Display Confirmation Prompt.
If the Display Properties window is still open, click on the Ok button to close the window.
39