Download powerTWO User Manual
Transcript
Differentiator A differentiator measures the rate of change of its input value. For example, if we have a velocity input, a differentiator will give us the acceleration. For a changing weight input in lbs it will give us the rate of change in lb/sec. In the scale input you must look after the integration or differentiation constant and any change of time-base. A differentiator always implies a unit conversion. Luckily the usual conversion factor is 1, as in the following example; the result of differentiating a voltage is just volts/sec. More information about conversions can be found in the Unit Conversions section. The following creates a differentiator with an interval of 100 ms. The example input value is in volts and the differentiator converts its input value from volts to volts/sec. Extending the interval beyond the minimum of 2.5 ms has the effect of smoothing (low-pass filtering) the output and with that filtering it also delays the output. Once created, the Differentiator appears as: powerTWO User Manual 46