Download powerTWO User Manual

Transcript
Differentiator
A differentiator measures the rate of change of its input value. For example, if we have a velocity
input, a differentiator will give us the acceleration. For a changing weight input in lbs it will give us
the rate of change in lb/sec. In the scale input you must look after the integration or differentiation
constant and any change of time-base.
A differentiator always implies a unit conversion. Luckily the usual conversion factor is 1, as in the
following example; the result of differentiating a voltage is just volts/sec. More information about
conversions can be found in the Unit Conversions section.
The following creates a differentiator with an interval of 100 ms. The example input value is in volts
and the differentiator converts its input value from volts to volts/sec. Extending the interval beyond
the minimum of 2.5 ms has the effect of smoothing (low-pass filtering) the output and with that
filtering it also delays the output.
Once created, the Differentiator appears as:
powerTWO User Manual
46