Download powerTWO User Manual
Transcript
Freq User Inputs Freq user inputs measure the frequency of a logic input, i.e. how often the logic input changes. UserIOs 0 & 1 measure frequencies up to 10 kHz and require an input high level of 11.5 Volts or more. UserIOs 2 to 7 measure frequencies up to 200 Hz. Freq user inputs provide the frequency value, the associated step value and steps as output. The following example is a frequency input calibrated to a magnetic sensor on a driveshaft. With a 3.43 differential & 20" tire (5.24 ft. in circumference) 1 shaft rev = 5.24/3.43 = 1.53 ft 88 fps (60mph) = 57.6 Hz We‟ve chosen steps at 176 fps and 220 fps (120 and 150 mph), as follows: When created, the Freq input appears as on the right. See the “Units Management section” for Units selection and definition and for calibration. powerTWO User Manual 28