Download SvanPC++ User Manual

Remote Connection Wizard is not allowed. If direct cable connection is currently active, the list is
updated automatically at the moment of connection / disconnection.
The background of the Status field for the connected stations flashes in green in case when
measurement is in progress. When the measurement is stopped, the background color of the
Status field turns to red, as shown in Fig.11-12b.
Fig.11-12b A row in the Instruments table in the Remote communication center.
Flashing green background of the Status field means that measurement is currently
in progress, while static red one – that the measurement is stopped.
The buttons at the right side of the window allow for:
 Configuring the instrument’s settings (Station configuration),
 Downloading files from the instrument (SVAN Files)
 Communicating with instruments using various types of RC sessions (Automatic files download,
Live results preview, Remote session, Continuous logger download),
 Configuring online alarms settings (Alarms),
 Stopping all the current RC sessions (Terminate RC service).
To remotely start measurement in selected connected instruments, use the Start measurements
button. To update the current measurement status of the connected instruments, use the Check
instrument(s) status button. In case of stations connected via USB, the status is updated
automatically.
You can also display more detailed information about connected instruments by pressing the
Toggle mode button. An additional part of the Remote Communication Center window is then
opened, containing the values of several parameters such as free space, battery state etc. You can
copy all the displayed data to the clipboard for later use pressing the Copy to clipboard button.
© SVANTEK
- 161 -
SvanPC++ User Manual