Download Contents

interior cables.
Step 3: Slightly uplift the cover, and then turn the left.
Step 4: Install batteries. The positive poles direct towards the
RF connector. If only two batteries are installed, please put them
the left-most side and the right-most side((position 1 and 2 in Chart
1-3).
Step 5: check the cable plug, and any deviation is not allowed.
Step 6: Close the chassis in reverse order. Press POWER to check.
If nothing unusual occurs, twist screws.
1.3 How to Mount Shoulder Strap
There are mounting points in the tail and in the top, so mounting
on the both sides is allowed. If the user need to use KC901S when
carrying, mounting the strap in the tail is preferred.
Chart 1-3:Battery Installment
Unwind the strap and remove it from the plastic fasteners, thread
it through the mounting points and lock in the plastic fasteners.
7