Download Instruction Manual
Transcript
4 Specifications and Warranty SPECIFICATIONS COMMON TO ALL MODELS Forward Gain Adjustment Range: 10 dB minimum. Slope Control Adjustment (54 MHz): 10 dB minimum. Input/Output Impedances: 75 Ohms. Input and Output Monitor Ports: -30 dB. Fixed Input Attenuator: Plug-in (SXP type) available. Fixed Input Equalizer: Plug-in (QSA type) available. Hum Modulation: -70 dB. Frequency Coverage (return path): 5 to 36 MHz. Active Return Path Gain: 20 dB minimum. Return Path Input Attenuator: 0 to 10 dB adjustable. RF Shielding: Leakage complies with FCC Part 76. Power Requirement: 26 VAC from supplied transformer with six foot amp-to-transformer cable. ADDITIONAL SPECIFICATIONS FOR SPECIFIC MODELS DA7533 Frequency Coverage (fwd path): 49 to 750 MHz. Forward Gain: 33 dB. Noise Figure: 7 dB maximum. Return Loss, Input & Output: 14 dB. Channel Loading: 110 CH. Output Level (maximum per channel for distortions listed below): +44 dBmV. Input Level (maximum without using fixed input attenuator): +18 dBmV. Optimum Input Level Range: +10 dBmV to +15 dBmV. Nonlinear DistortionsComposite Triple Beat: - 58 dB. Composite Second Order: - 58 dB. Cross-modulation: - 62 dB. Operating Temperature Range: - 20 deg. to + 60 deg. C. Power Transformer: Supplied transformer has 120 VAC/ 60 Hz ±10% input requirement at 35 W. Output is 26.3 VAC with screw terminals for attaching power cable from amplifier. Supplied 120 VAC 3-wire line cord is six feet long. Size: 10.25" (26 cm) L x 7.25" (18.4 cm) W x 2.75" (7 cm) D. Weight: 6 lbs. 12 oz. (3.1 Kg), including AC adapter. DA7543 49 to 750 MHz. 43 dB. 6.5 dB maximum. 14 dB. 110 CH. DA8632 49 to 860 MHz. 32 dB. 7.5 dB maximum. 12 dB. 129 CH. DA8642 49 to 860 MHz. 42 dB. 7 dB maximum. 12 dB. 129 CH DA100032 DA100042 49 to 1000 MHz 32 dB 42 dB 8 dB maximum 7 dB max. 12 dB 12 dB 150 CH 150 CH +44 dBmV. +40 dBmV. +40 dBmV +38dBmV +38 dBmV +10 dBmV. +16 dBmV. +7 dBmV. +12 dBmV +7 dBmV +0 dBmV to +5 dBmV. +7 dBmV to +12 dBmV. -2 dBmV to + 5 dBmV. +6 dBmV to +10 dBmV -2 dBmV to +5 dBmV - 58 dB. - 58 dB. - 62 dB. - 60 dB. - 58 dB. - 64 dB. - 60 dB. - 58 dB. - 64 dB. -62 dB -60 dB -66 dB -62 dB -60 dB -66 dB Output levels listed above are for all analog and flat channel loading. Output levels could be significantly higher when some channels are QAM , 6 dB below analog, and when slope is applied. THREE YEAR LIMITED WARRANTY R.L. DRAKE LLC warrants to the original purchaser this product shall be free from defects in material or workmanship for three (3) years from the date of original purchase. During the warranty period R.L. DRAKE LLC or an authorized Drake service facility will provide, free of charge, both parts and labor necessary to correct defects in material and workmanship. At its option, R.L. DRAKE LLC may replace a defective unit. To obtain such warranty service, the original purchaser must: (1) Retain invoice or original proof of purchase to establish the start of the warranty period. (2) Notify R.L. DRAKE LLC or the nearest authorized service facility, as soon as possible after discovery of a possible defect, of: (a) the model and serial number, (b) the identity of the seller and the approximate date of purchase; and (c) A detailed description of the problem, including details on the electrical connection to associated equipment and the list of such equipment. (3) Deliver the product to R.L. DRAKE LLC or the nearest authorized service facility, or ship the same in its original container or equivalent, fully insured and shipping charges prepaid. Correct maintenance, repair, and use are necessary to obtain proper performance from this product. Therefore carefully read the Instruction Manual. This warranty does not apply to any defect that R.L. DRAKE LLC determines is due to: (a) Improper maintenance or repair, including the installation of parts or accessories that do not conform to the quality and specifications of the original parts. (b) Misuse, abuse, neglect or improper installation. (c) Accidental or intentional damage. - All implied warranties, if any, including warranties of merchantability and fitness for a particular purpose, terminate three (3) years from the date of the original purchase. - The foregoing constitutes R.L. DRAKE LLC’S entire obligation with respect to this product, and the original purchaser shall have no other remedy and no claim for incidental or consequential damages, losses or expenses. Some states do not allow limitations on how long an implied warranty lasts or do not allow the exclusions or limitation of incidental or consequential damages, so the above limitation and exclusion may not apply to you. - This warranty gives you specific legal rights and you may also have other rights which vary from state to state. This warranty shall be construed under the laws of Ohio. CUSTOMER SERVICE AND PARTS TELEPHONE: (937) 746 6990 www.rldrake.com TELEFAX: +1 (937) 806-1576 WORLD WIDE WEB SITE: http://