Download Model 940 USERS MANUAL
Transcript
2 Specifications 2.1 Electrical Characteristics Single-Phase Models Type E94P020S1N E94P040S1N Mains Voltage (1) 120V(2) or 240V(3) E94P020S2F 1~ Mains 1~ Mains Current Current Rated Output Peak Output (doubler) (Std.) Current (4) Current (5) 9.7 5.0 2.0 6 16.8 8.6 4.0 12 -- 5.0 2.0 6 E94P040S2F 120 / 240V(3) -- 8.6 4.0 12 E94P080S2F (80 V -0%...264 V +0%) -- 15.0 8.0 24 -- 18.8 10.0 30 E94P100S2F Single/Three-Phase Models Type Mains Voltage (1) E94P020Y2N E94P040Y2N E94P080Y2N 120 / 240V(3) 1~ or 3~ (80 V -0%...264 V +0%) E94P100Y2N E94P020T4N E94P040T4N E94P050T4N (1) (2) (3) (4) (5) 400 / 480V 3~ (320 V -0%...528 V +0%) 1~ Mains 3~ Mains Rated Output Peak Output Current Current Current (4) Current (5) 5.0 3.0 2.0 6 8.6 5.0 4.0 12 15.0 8.7 8.0 24 18.8 10.9 10.0 30 -- 2.7 2.0 6 -- 5.5 4.0 12 -- 6.9 5.0 15 Mains voltage for operation on 50/60 Hz AC supplies (48 Hz -0% … 62Hz +0%). Connection of 120VAC (45 V … 132 V) to input power terminals L1 and N on these models doubles the voltage on motor output terminals U-V-W for use with 230VAC motors. Connection of 240VAC or 120VAC to input power terminals L1 and L2 on these models delivers an equal voltage as maximum to motor output terminals U-V-W allowing operation with either 120VAC or 230VAC motors. Drive rated at 8kHz Carrier Frequency. Derate Continuous current by 17% at 16kHz. Peak RMS current allowed for up to 2 seconds. Peak current rated at 8kHz. Derate by 17% at 16kHz. Applies to all models: Acceleration Time Range (Zero to Max Speed) Deceleration Time Range (Max Speed to Zero) Speed Regulation (typical) Input Impedance (AIN+ to COM and AIN+ to AIN-) Power Device Carrier Frequency (sinusoidal commutation) Encoder power supply (max) Maximum encoder feedback frequency 0.1 … 5x106 RPM/sec 0.1 … 5x106 RPM/sec ± 1 RPM 47k ohmΩ 8,16 kHz +5 VDC @ 300 mA 2.1 MHz (per channel) 2.2 Environment Vibration Ambient Operating Temperature Range Ambient Storage Temperature Range Temperature Drift Humidity Altitude 2 g (10 - 2000 Hz) 0 to 40ºC -10 to 70ºC 0.1% per ºC rise 5 - 90% non-condensing 1500 m/5000 ft [derate by 1% per 300m (1000 ft) above 1500m (5000 ft)] S94P01A 7