Download PDF manual

Coulometrics User’s Manual
9
the bottom barcode, first activating the ODP Barcode Bottom box, then scanning the
bottom barcode.
Note: The leg, site, hole, etc. information is automatically
set.
3. Enter the appropriate vial number in the “Vial#” entry field.
4. Click Save to save the new sample to the “Sample_List” window (or you can weigh the
sample before saving it, which will send all information including the weight back to the
“Sample_List” window).
Editing a Sample
Edit an existing sample by first clicking once on the sample in the “Sample List,” then pressing the Edit button. This opens the sample’s ID window. Make any changes using the up and
down arrow buttons and be sure to Save before quitting.
Deleting a Sample
Delete a sample by first clicking once on the sample in the “Sample List,” then pressing the
Delete button. The program asks if you really want to delete the sample. Click OK to continue
or Cancel to stop.
Ocean Drilling Program