Download E1339-90001
Transcript
ARM Subsystem The ARM subsystem allows a scan list to be scanned multiple times (1 through 32,767) with one INITiate command. Syntax ARM :COUNt < number > MIN|MAX :COUNt? [MIN|MAX] ARM:COUNt < number > MIN | MAX Allows scanning cycles to occur a multiple of times (1 to 32767) with one INITiate command when INITiate:CONTinuous OFF |0 is set. MIN sets 1 cycle and MAX sets 32767 cycles. Parameters Parameter Name Parameter Type Range of Values Default Value number numeric 1-32767|MIN|MAX 1 Comments • Number of Scans: Use only values between 1 (MIN) and 32767 (MAX) for the number of scanning cycles. • Related Commands: ABORT, INITiate[:IMMediate], INITiate:CONTinuous • *RST Condition: ARM:COUNt 1 Example Example: Setting Ten Scanning Cycles This example sets a Relay Driver Module for 10 scans of channels 0 through 3. For 72-channel mode, when the scan sequence completes channels 0 through 3 are closed. For 36-channel mode, when the scan completes channels 0 through 3 SET are closed and channels 0 through 3 RESET are open. ARM:COUN 10 SCAN (@100:103) INIT 62 Relay Driver Module Command Reference !Set 10 scans per INIT command !Scan channels 0-3 !Start scan, close channel 0