Download CN100 User`s Manual

Compass Networks
Transmit Universal Settings
Continuous Mode
Transmit a continuous stream of packets
Single Burst Mode
Transmits a single burst streams at the user-selected
burst number
Multiburst Mode
Repetitive bursts with a user-adjustable delay between
each burst.
Continuous Multiburst Mode
Runs multiburst mode continuously.
Packet Per Burst: Number of packets per burst.
Multi-burst Count: Number of times to burst
Inter- burst Gap: Interburst gap is the gap between bursts.
Random Frame Length
Minimum 124 bytes
Maximum 1514 bytes
Schedule Mode
Inter Frame Gap
Time: Size of gap between frames
Units: Unit of measure for gap
Frame Rate Bandwidth: Enables stream frame
rate/bandwidth per stream
Bandwidth
Line rate: Displays the line rate settings of the selected port
Payload capacity: Displays the Payload capacity of the
selected port.
Frame Rate/Bandwidth Calculated
Selected Bandwidth: Displays the actual bandwidth of the
selected stream.
Total Bandwidth: Total aggregate bandwidth of all enabled
streams.
Total Bit Rate: Total aggregate bit rate for of all enabled
streams.
Total frame Rate: Total aggregate Frames per Second
11.1 Streams and Frames
255 individual streams may be created in which you can select predefined packets and protocols such as
IPv4, IPv6, or create user-defined packets with byte level definition. Specify the length and type of packet
such as IPv4, IPv6, UDPv4, TCPv4, IPX, UDP-IPv6, TCP-IPv6, User Defined. Insert CRC, Symbol,
alignment Errors or enable signature field to test LAN QoS testing for detailed statistics and histograms.
Some protocols and Compass tests packets have reserved bytes in the packets for LAN QoS Testing, these
bytes will be grayed out from editing purpose.
CN-100 User Manual
22