Download CN100 User`s Manual

Transcript
Compass Networks
33 Frame Loss Testing
(RFC2544, section 26.3)
This test characterizes the forwarding performance of the DUT/SUT as a function of load.
Send packets of a specified size from all sources to all destinations. At each packet size the test
determines the forwarding rate and the raw number of lost packets. The offered load is a
percentage of the theoretical maximum for that packet size. At the completion of this Iteration,
measure the number of packets transmitted and received on all streams. If packet loss occurs the
test will reduce the offered load and repeat the test. When two successive trials result in no
packet loss, or when the maximum defined rate is reached, the test will go to the next packet
size.
1.
2.
3.
4.
5.
6.
7.
Define the traffic mapping Source and destination test ports.
Define the test parameters using the test setup screen.
Select Test to Run or use batch test to run multiple tests.
Click Start (save log file)
Test progress shows the script as the test as it is running
Select Results and view the desired test results graphs.
Select test log, view log to see the log file created during test.
CN-100 User Manual
55