Download to - Automatic Doors

G.4
Setup – Local Functions
Authority Level – Factory, Master, Temporary Master and User/Customer Passcodes
Setup:
Local
EXIT KEY
< CYCLIC
SCREENS >
ENTER KEY
EXIT KEY
Silence Buzzer
48 hours
Show Time
Lock & Unlock
Disable or Enable
Time Lock/Unlock
UP and
DOWN
KEYS to
cycle through
the Menu
Disable or Enable
Partial Opening
ENTER
ENTER
Change
User Passcode
See Section 2.4.6.1 for displaying Time Lock for
version v500 and later.
Section 2.4.6.2 for legacy time lock
ENTER
ENTER
Timed Lock
Disable / Enable
ENTER KEY to accept & return
to Local Menu.
EXIT KEY returns to Local
Menu without change.
Partial Opening
Disable / Enable
ENTER KEY to accept & return
to Local Menu.
EXIT KEY returns to Local
Menu without change.
Refer to Section 2.4.1 – Set
Day & Time.
Set Day
& Time
People
Counter
ENTER KEY to execute Reset
& return to Local Menu.
EXIT KEY returns to Local
Menu
Confirm
48hr Reset
ENTER
ENTER
Counter
12345678
New Code =
NNNN
ENTER KEY to confirm
whether to reset Counter.
EXIT KEY returns to Local
Menu without reset.
4 digits 0 - 9
Code OK?
NNNN
ENTER KEY to confirm.
EXIT KEY return without reset.
Managed
Lock
View Function
Settings
ENTER
Confirm
Managed Lock
NNNN
ENTER KEY to confirm.
EXIT KEY to reject.
Press ENTER KEY then use UP/DOWN Keys to view various
function settings, including Serial Number, Slide and Remote
versions etc.
EXIT KEY returns to Local Menu.
NOTE:
When displaying the Functions Menu, the display will revert to the Main Menu if a key press is not
received within the menu timeout time (default 30 seconds).
When displaying a Function, the display will revert to the Functions Menu if a key press is not
received within the entry timeout time (default 15 seconds).
LS220B LS300 LSW LP
Page 47
V-500 2013