Download model 8015 - CareFusion

Alarms and Messages (Continued)
Audio Characteristics
Type
Sound
EtCO2 Alarm (HIGH PRIORITY)
EtCO2 Alarm (LOW PRIORITY)
Note
A sequence of five beeps.
Variable volume; can be silenced for
2 minutes.
One long beep approximately every Variable volume; can be silenced for
2 minutes.
4 seconds.
EtCO2 Error (Hardware Detected)
A single alarm tone volume.
Fixed maximum decibel volume;
cannot be silenced.
EtCO2 Error (Software Detected)
Pairs of long beeps.
Fixed maximum decibel volume; can
be silenced for 2 minutes.
Alarms
High Priority Alarm
Meaning
Response
CHANNEL ERROR
Hardware failure detected by
software.
To silence alarm and continue
operation of unaffected instrument,
press CONFIRM soft key. Replace
module, as needed.
DISPOSABLE DISCONNECTED
Microstream® Disposable removed
from instrument during monitoring
mode.
Attach Microstream® Disposable to
instrument.
HIGH ETCO2
EtCO2 value is above specified
Assess patient condition. Confirm
correct alarm limit values are
selected.
HIGH FICO2
FiCO2 value is above specified limit
Assess patient condition. Confirm
correct alarm limit values are
selected.
HIGH RR
Respiratory rate is above specified
limit.
Assess patient condition. Confirm
correct alarm limit values are
selected.
LOW ETCO2
EtCO2 value is below specified limit. Assess patient condition. Confirm
limit.
correct alarm limit values are
selected.
5-28 Troubleshooting and Maintenance
Alaris® System DFU – with v9 Model 8015
EtCO2 Module Section