Download Slam Service Manual

" PROPRIETAR Y INFORMATI ON " No use
Of
r.production m1y be ~e of this
document without the eicpress written
permission of MIA CO, INCO RPORAT ED
1-4\ NGE.
SIDE.
NOTES:
I. LED CABLE Ass'Y. (ITEM 16) CONTACTS TO BE INSERTED INTO P4 HOU51NC:i
(ITEM 15) AS FOLLOWS : BLK WIRE TO P4-I , BLK WIRE TO P4-3 AND RED WIRE
TO P4-2 .
2. WHEN MOUNT I NC:i LEDS (VIEW H) (ITEM 15), PUSH LEDS THRU HOLES AFTER
. ADDI NC:i BUSHING AND RETAINER . BEND LEADS TO FIT ROUTINC;i.
CAUTION: LEADS ARE BRITTLE,GARE MUST BE TAKEN .
3 . TO MOUNT INTERLOCK A5SY. (ITEM 9) ,SLIDE REAR. OF COVER UNDER PREAOJUSTED SCREWS (AS SHOWN IN SEC l'ION 0 - D) AND MOUNT FRONT US! NG
AGG ESS HOLES.
·
4 .IF COIN COUNTER OPTION IS USED,CRIMP TWO BUTT CONNECTORS (YIO
WIRES) TO BU<. WIRES ON GOUf'..ITER. MOUNT COUNTER TO WALL OF CABINET
USING TWO NO. 8 SHEET METAL SCREWS i I/ 2 LON(i.
5 .ITEM 24 MUST BE TIGHT A(iAINST INTERLOtK SWITCH . TERM! NAL GANNO-T
BE EXPOSED.
6 .INSTALL CABLES APPROX . AS SHOWN AND FASTEN IN PLACE WITH TIES
(ITEM 22~ . STAPLE. TIES TO CABINET.
LEFT SIDE CONTROLS
7. 00 NOT TRAP WIRES BETWEEN CABINET AND DOOR.
RIGHT SIDE CONTROLS
8.PLACE ITEMS 3B AND 39 IN COIN .BOX PRIOR TO SHIPPING .
9 . CUT ITEM 6 IN IB INCH LEt-JGTHS AND STICK TO ITEM I AS SHOWN
IC.MOUNT THE C:iROUND TERMINALS IN BETWEEN THE SWITCHES AND
THE DOOR.
I I.GUT ITEM 7 IN I INCH LEN~THS AND STICK TO ITE.M 12 A.5 SHOWN .
12.FINAL ADuUSTMENT OF THESE CONTROLS SHALL BE DONE IN THE FIELD.
13.JOY STIGK CONNECTORS SHALL BE MARKED RIC;iHT OR LEFT SIDE. AT
SUB A55'Y. LEVEL .
14.SCALE: 1/4
'.J IE.W
5E.E. 514
DOOR SIDE
H
'2.
19
D S EE.
'5142-
19
LOCATE FAP.SIOE
OF DOOR APPROX .
AS SHOWN
27
K
MONl'TO R
su PPU E.D
c~e, 1NE.T
'::>14 1E.LD
WI TH
CAB/N£T ASSY. ,
'5L,O.,M
'M
ISSl.IE:
1011 -4000
I
DAT£ 16 JUNE JLM
RE: VISION
RE.LE.l>.5'E.D "10 IV\l'C,,
<./'2. 1 /"lS
~1...N\
6
NOTE 9
MIRCO GAM£S,INC.
PJ.10£'NIX ARIZONA
SHC'E:TI OF2
36