Download Display Accelerator Board
Transcript
9 Orient the analog RGB cable properly, and connect it to the connector (J5) on the display accelerator board. Be sure to verify that the cable is connected securely. Step 2: Connecting the Monitor Connect the monitor to monitor connector 2 or the HDMI monitor connector. 10 Attach the supplied connector cover to HDMI monitor connector monitor connector 1. or Monitor connector 2 11 Reinstall the chassis cover by performing the procedure of step 1 in reverse order. Caution • When monitors are connected via a monitor switch, images may not always display. We recommend connecting monitors directly to the unit. • Monitor connector 2 and the HDMI monitor connector cannot be used at the same time. Step 2: Connecting the Monitor 9