Download 845Z Injection Module User's Guide
Transcript
D Appendix Specifications Methods Injections 1 2 3 Two methanol blank injections Ten injections of 6 ng/mL anthracene in methanol Two methanol blank injections Injection protocol Total loop injection Initialize your system (i.e. home syringe at rinse station and home XYZ arm) before running any method. 1 2 3 4 5 6 7 8 9 Set injection valve to load Aspirate 10 µL air gap at 0.3 mL/min. Move to sample location, 15 mm from bottom Aspirate 90 µL sample volume (2 to 3 times loop overfill + dead volume) of 6 ng/mL anthracene in methanol at 5 mL/min. Wait 0.02 minutes to equilibrate Set injection valve to inject Coordinate with start of data collection Move to outside rinse station Rinse probe: aspirate 400 µL from reservoir at 20 mL/min. then dispense 500 µL (400 µL rinse volume + 90 µL sample volume + 10 µL air gap) at 20 mL/min. Injection reproducibility calculation CV=Standard deviation for injection set * 100 Average area for injection set D-6