Download 845Z Injection Module User's Guide

Transcript
D
Appendix
Specifications Methods
Injections
1
2
3
Two methanol blank injections
Ten injections of 6 ng/mL anthracene in
methanol
Two methanol blank injections
Injection protocol
Total loop injection
Initialize your system (i.e. home syringe at rinse
station and home XYZ arm) before running any
method.
1
2
3
4
5
6
7
8
9
Set injection valve to load
Aspirate 10 µL air gap at 0.3 mL/min.
Move to sample location, 15 mm from bottom
Aspirate 90 µL sample volume (2 to 3 times
loop overfill + dead volume) of 6 ng/mL
anthracene in methanol at 5 mL/min.
Wait 0.02 minutes to equilibrate
Set injection valve to inject
Coordinate with start of data collection
Move to outside rinse station
Rinse probe: aspirate 400 µL from reservoir at
20 mL/min. then dispense 500 µL (400 µL rinse
volume + 90 µL sample volume + 10 µL air gap)
at 20 mL/min.
Injection reproducibility calculation
CV=Standard deviation for injection set
* 100
Average area for injection set
D-6