Download Operating Instructions - John Morris Scientific

4.
Lay the "rear" flange onto a paper towel with the window
(prism) facing up.
5.
Remove the outer O-ring and clean the metallic surfaces of
the "front" flange.
6.
Lift up the measuring cell mount and press the window of the
"front" flange out of the measuring cell using a clean paper
towel. Place the loose window on the lens cleaning paper
with the outside facing down.
Caution !!!
Do not catch the edges of the window when pressing it out. This
could destroy the glass edges.
Lodged particles may make the window somewhat difficult to remove.
Attempt to tilt it somewhat within the frame when pressing it out
by pressing on one side or the other.
The windows may only be touched by hand on their edges.
"analysette 22“ MicroTec plus
Page 26