Download User's Guide Copy Operations
Transcript
Additional copy operations 4 4.5 Registering copy programs (Mode Memory) Frequently used copy settings can be stored together as a program to easily be recalled. A maximum of 30 programs can be registered. A name of up to 16 characters can be specified for the registered copy programs. 2 Note If the optional hard disk is installed, a maximum of 100 copy programs can be registered. 1 Using the touch panel and control panel keys, specify the copy settings to be registered in the copy program. Can the current settings be checked? % To check the currently specified copy settings, touch [Check Job] in the left panel, and then touch [Job Details]. For details, refer to "Checking the copy settings (Check Job)" on page 4-3. ? 2 Press the [Mode Memory] key. The Recall Copy Program screen appears. 3 From the copy program buttons that appear in the screen, touch the button where you wish to store the copy settings, and then touch [Register Program]. – – There are three Recall Copy Program screens. Touch and to display a different screen. If 30 copy programs have been registered, delete an unnecessary copy program. For details on deleting copy programs, refer to "Deleting a copy program" on page 4-19. The Register Copy Program screen appears. 4-16 bizhub 751/601 (Version 2)
Related documents
Ricoh Aficio CL5000 User's Manual
Copy Operations User's Guide User's Guide
User`s Guide - Florida State University College of Law
Manual del operador
Sharp R-508FS User`s guide
Konica Minolta 750 All in One Printer User Manual
Dell 3333dn and 3335dn Laser MFP User`s Guide
Apparatus and method for identifying cable phase in a three
User's Guide [Print Operations]
Scanner Operation Guide
United Security Products AVD-45c User`s guide
User Box Operation Guide - XBM Photocopiers and Printers