Download TouchWare for Windows User's Guide

Chapter 1 Installing TouchWare
3.
15
Click Start → Run and type the following:
A:\Setup -r
This option enables the system to record your installation choices and create a
Setup.iss file in the Windows directory containing the script.
4.
Perform the installation for recording.
5.
Copy the Setup.iss file to each of the three TouchWare install diskettes and then
delete the file from the Windows directory.
6.
Reinsert diskette #1, click Start → Run and invoke the silent install facility by
typing the following:
A:\Setup -s
The system prompts you to enter diskette #2 and #3 when required. If
necessary, you’ll have to remove diskette #3 before the system restarts.
Silent Install From a CD, Hard Drive, or Network Drive
To perform a silent install from a CD or other drive:
1.
Create a temporary directory on your computer’s hard drive.
2.
From the temporary directory, copy each of the three TouchWare directories
into its own subdirectory called disk1, disk2, and disk3 respectively.
3.
Edit the silent.ini file in the disk1 directory to reflect the port and baud settings
to be used for all silent installations.
4.
Click Start → Run and type the following:
C:\Temp\disk1\Setup -r (where C:\Temp is your temporary directory)
This option enables the system to record your installation choices and create a
Setup.iss file in the Windows directory that contains the script.
5.
Perform the installation for recording.
6.
Copy the Setup.iss file into the disk1 directory and then delete the file from the
Windows directory.
7.
Copy all three disk directories onto the CD, hard drive, or network drive from
which you want to perform the install, for example E:\Install.
8.
Click Start → Run and invoke the silent install facility by typing the following:
E:\Install\disk1\Setup –s (where E:\Install is your install path)