Download ARTS PDF Crackerjack User Guide

ARTS PDF Crackerjack 4.2
4.6.4 Tile Output
When a PDF document’s page size is larger than the available media size(s) on an
output device, this option can be useful for printing the job across multiple pages which
can then be combined to see the entire print job. This option would normally be used to
check, or proof, output on a desktop laser printer for a job which is intended to be run on
a large format device for final output. Another application might be tiling different
sections for billboards or theatrical scenery. When this option is selected ARTS PDF
Crackerjack’s Preview window will display a representation of the tiled output.
•
Horizontal Overlap / Vertical Overlap
When “Tile Output” is selected the additional option to specify horizontal and vertical
overlap are made available. Overlap is generally used so that portions of each tile will
overlap the neighboring tile(s). This is helpful when printing to desktop laser printers
which usually have some unprintable region on the page edges. With overlap the output
can be aligned so that all data is visible.
Page 22 of 45
ARTS PDF Crackerjack Documentation
Copyright © 1998 – 2003 ARTS PDF