Download ARTS PDF Crackerjack User Guide

Transcript
ARTS PDF Crackerjack 4.2
4.7
The “Options” Panel
This panel allows for setting certain options which affect how the printed output will
appear
4.7.1 Offsets
These options allow for the repositioning of the PDF page on the media and the
repositioning of the imageable area on the PDF page, both either vertically or
horizontally. Positive offsets move the PDF page up or to the right. Negative offsets
move the PDF page down or to the left. The initial offset defaults are zero. The offsets
may be specified in inches, centimeters, millimeters, or points depending on the Units
selection. Offsets are applied after scaling. As such, it is recommended that one
consider the offsets as moving the center of the PDF page or imageable area to the new
location.
•
Page to media
Often, it is necessary to reposition the PDF page on the media. For example, if the
default positioning places the page in an unprintable area used for media transport, the
Page 23 of 45
ARTS PDF Crackerjack Documentation
Copyright © 1998 – 2003 ARTS PDF