Download ARTS PDF Crackerjack User Guide
Transcript
ARTS PDF Crackerjack 4.2 4.7 The “Options” Panel This panel allows for setting certain options which affect how the printed output will appear 4.7.1 Offsets These options allow for the repositioning of the PDF page on the media and the repositioning of the imageable area on the PDF page, both either vertically or horizontally. Positive offsets move the PDF page up or to the right. Negative offsets move the PDF page down or to the left. The initial offset defaults are zero. The offsets may be specified in inches, centimeters, millimeters, or points depending on the Units selection. Offsets are applied after scaling. As such, it is recommended that one consider the offsets as moving the center of the PDF page or imageable area to the new location. • Page to media Often, it is necessary to reposition the PDF page on the media. For example, if the default positioning places the page in an unprintable area used for media transport, the Page 23 of 45 ARTS PDF Crackerjack Documentation Copyright © 1998 – 2003 ARTS PDF