Download 10-Gbps Ethernet MAC MegaCore Function User Guide
Transcript
D. ToD Synchronizer The ToD Synchronizer provides a high accuracy synchronization of time of day from a master ToD clock to a slave ToD clock. This synchronizer provides more user flexibility for your design. The IEEE 1588v2 specifies multiple type of PTP devices, which include the following clocks: ■ ordinary clock ■ boundary clock ■ transparent clock ■ peer to peer transparent clock Some of these PTP devices, boundary clock for example, consists of multiple ports that act as master or slave in the IEEE 1588v2 system. All these ports may share a common system clock or have its own individual clock. If every port has an individual ToD running on its own clock, then you must implement a method to instantiate one ToD clock as the master and the rest of the ToD clocks synchronized to this master ToD clock. For this purpose, Altera provides the ToD synchronizer module. This module synchronizes a master ToD and a slave ToD in the following conditions: ■ Master and slave ToD clocks are in the same frequency within the range of 125 MHz and 156.25 MHz, but different phase. ■ Master and slave ToD clocks are same in the same frequency within the range of 125 MHz and 156.25 MHz, but different PPM. ■ Master and slave ToD clocks are in different frequencies (25 MHz or 156.25 MHz). D.1. Device Family Support Table D–1 shows the level of support offered by the ToD clock for each Altera device family. Table D–1. Device Family Support Device Family August 2014 Support Arria V GX/GT/GZ/SOC Preliminary Cyclone V/SOC Preliminary Stratix V GX/GT Preliminary Other device families No support Altera Corporation 10-Gbps Ethernet MAC MegaCore Function User Guide