1
Download Command Line User's Guide
Transcript
AT-S63 Management Software Command Line User’s Guide CREATE SNMPV3 NOTIFY Syntax AlliedWare Plus Command Available create snmpv3 notify=notify tag=tag [type=trap|inform] [storagetype=volatile|nonvolatile] Parameters notify Specifies the name of an SNMPv3 Notify Table entry, up to 32 alphanumeric characters. tag Specifies the notify tag name, up to 32 alphanumeric characters. This is an optional parameter. type Specifies the message type. This is an optional parameter. The options are: storagetype trap Trap messages are sent, with no response expected from another entity (NMS or manager). This is the default. inform Inform messages are sent, with a response expected from another entity (NMS or manager). Specifies the storage type of this table entry. This is an optional parameter. The options are: volatile Does not allow you to save the table entry to the configuration file on the switch. This is the default. nonvolatile Allows you to save the table entry to the configuration file on the switch. Description This command creates an SNMPv3 Notify Table entry. Examples The following command creates the SNMPv3 Notify Table entry called “testengtrap1” and the notify tag is “testengtag1.” The message type is defined as a trap message and the storage type for this entry is nonvolatile storage. create snmpv3 notify=testengtrap1 tag=testengtag1 type=trap storagetype=nonvolatile Section IV: SNMPv3 521
