1
Download Command Line User's Guide
Transcript
AT-S63 Management Software Command Line User’s Guide SET GARP PORT Syntax AlliedWare Plus Command Available set garp=gvrp port=port mode=normal|none Parameters garp Specifies the GARP application to be configured. GVRP is the only GARP application supported by the AT-9400 Switch. port Specifies the port to be configured. You can specify more than one port at a time. mode Specifies the GVRP mode of the port. Modes are: normal The port participates in GVRP. The port processes GVRP information and transmits PDUs. This is the default. none The port does not participate in GVRP. The port does not process GVRP information or transmit PDUs. Note The online help for this command contains an STP option. This option is not supported. Description This command sets a port’s GVRP status. Set a port’s mode to Normal if it is to learn remote VLANs and transmit PDUs. Set its mode to None If it is not to participate in GVRP. Examples The following command prevents ports 1 to 4 from participating in GVRP: set garp=gvrp port=1-4 mode=none The following command activates GVRP on port 3: set garp=gvrp port=3 mode=normal Section VI: Virtual LANs 669
