1
Download Command Line User's Guide
Transcript
AT-S63 Management Software Command Line User’s Guide SET DOS LAND Syntax set dos land port=port state=enable|disable [mirroring=yes|no|on|off|true|false|enabled|disabled] Parameters port Specifies the switch port on which you want to enable or disable the Land defense. You can specify more than one port at a time. state Specifies the state of the Land defense. The options are: mirroring enable Activates the defense. disable Deactivates the defense. This is the default. Specifies whether the examined traffic is copied to a mirror port. Options are: yes, on, true enabled Traffic is mirrored. These values are equivalent. no, off, false disabled Traffic is not mirrored. This is the default. These values are equivalent. Description This command enables and disables the Land DoS defense. You can use the MIRRORING parameter to copy the intruding traffic to a destination port mirror for analysis with a data analyzer. To define the destination port, refer to “SET SWITCH MIRROR” on page 238. Example The following command activates the Land defense on ports 5 and 7: set dos land port=5,7 state=enable Section II: Advanced Operations 445
