1
Download 505 PLC WorkShop User Guide
Transcript
PLC WorkShop for Siemens 505 Chapter 6 – Programming • Auxiliary PLC Functions and Displays The controls within the Password Aliases group box are enabled only when either FasTrak Security or NT Authentication Security are in use. When these controls are clicked, a valid security administrator password must be entered. The Use Aliases Check Box When attaching to a PLC which contains a password, the Enter Password dialog requires the correct PLC password before granting access to the PLC. l If the Use Aliasescheck box is not selected, the actual password stored in the PLC must be entered. l If this check box is selected, the PLC password alias associated with the PLC’s actual password must be entered instead. The Edit Aliases Button The list of PLC passwords and the aliases with which they are associated can be accessed by clicking the Edit Aliases button. Clicking this button displays the PLC Password Aliases dialog below. - 335 -
