Download User's Manual

Transcript
Risks and Precautions
!
!
!
!
!
!
!
8
DS10
The power supply of the product must be isolated from the electrical
net. The user must always place a protective fuse in series to the power
supply circuit.
The control signals are isolated from the power supply during normal
working; anyway, during the designing of the application, the eventuality
that in case of breakdown these lines could reach the same potential as
the power supply, must be considered to meet safety requirements.
The product could be permanently damaged by corrosive substances
(such as gas, salts, etc.), liquids or conductive dusts. Even a long and
constant exposure to strong vibrations could cause the damage.
During some damage conditions the drive could emit sparks and fire.
The cabinet and the nearby components must be chosen to tolerate this
eventuality and to avoid propagation of flames to the application.
The products cannot be used in life support applications or where the
failure of the products could cause death or injury to people, animals or
things, or economic losses. The user not able to assure this condition
must not use the products herein described.
Do not dismantle the product, do not try and repair it and do not modify
it without being expressly authorized by LAM Technologies.
If the product is used in any manner that does not comply with the
instructions given in this manual, then the product could be permanently
damaged. For example, the product could be permanently damaged if
power supplied with voltage superior to the allowed one, if supply
polarity is inverted, if the motor is connected or disconnected while the
drive is operating, and so on.