Download USER'S MANUAL

Transcript
10. About Icons
This chapter describes icons.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
(In this table: F = Operable during a Free Running, C = Operable during a data capture, R = Operable during a replay)
No.
q
w
e
r
t
y
u
i
o
!0
!1
!2
!3
!4
Description
Operable behavior
Shrinks the time axis.
Expands the time axis.
Expands the Y axis of the selected channel.
Shrinks the Y axis of the selected channel.
Click this button to move the selected channel position to the left.
Click this button to move the selected channel position to the right.
Displays plot marks at the sample points of a waveform.
Opens a sub-screen to:
• Switch the scroll direction,
• Set the scale axis, and
• Reset the Y axis operation.
The message shown on the button can be displayed on the waveform screen.
The mark is captured along with the data.
Register the message from Record Settings and then Mark Settings.
Displays Cursor A in the waveform display.
Displays Cursor B in the waveform display.
Displays the level value for Cursor A in the digital value area.
Displays the level value for Cursor B in the digital value area.
Displays the level value for Cursor A-B in the digital value area.
C, R
C, R
F, C, R
F, C, R
F, C, R
F, C, R
F, C, R
F, C, R
Ref.
Section
10-1
10-1
10-1
10-1
10-2
10-3
C, R
10-5
C, R
C, R
C, R
C, R
C, R
10-4
10-4
10-1 Expand, Shrink, or Move the Y Axis
Select a channel and click one of these icons to expand, shrink, or move the Y axis.
How to Select a Channel
Enlarged Y-T Screen
Regular Y-T Screen
Highlight the
Channels to be
operated.
Select a Channel
to be operated.
CAUTION!!
There may be some deviation if you repeat the
operation to change back to the original state.
In this case, follow the steps in 10-3-3 "Reset
the Y Axis Operation".
ALTHEN GmbH • Frankfurter Str. 150-152 • 65779 Kelkheim • Telefon +49 (0)6195 / 70060 • [email protected] • www.althen.de