Download USER'S MANUAL
Transcript
13. Operating Procedure This chapter describes the basic operating procedure. The operating procedure starts with the software and the device in the connected status. For the connection procedure, see Section 4, "Connecting to a PC (Personal Computer)". The settings that are not addressed in the following sections are the factory default settings. No. q w e r t Operation Capture Settings Start Displaying past data during a data capture operation Stop Replay Data Description Make the settings required for data capture. Start data capture. Select Off for "Scroll" to display past data. Stop data capture. Replay data captured to the PC (personal computer). 13-1 Capture Settings Click the "Capture Settings" button to make the settings required for data capture. 13-1-1 AMP Settings Make the input settings shown below. CH used Input Range 2 channels (CH 1 and CH 2) CH 1: DC CH 2: TEMP CH 1: IV CH 2: TC-T Make the settings as shown in the following screen: ALTHEN GmbH • Frankfurter Str. 150-152 • 65779 Kelkheim • Telefon +49 (0)6195 / 70060 • [email protected] • www.althen.de