Download RX02 Floppy Disk System User's Guide

Transcript
1.S.3
Logical Format
Data is recorded on only one side of the diskette. This surface is divided into 77 concentric circles or
"tracks" numbered 0-76. Each track is divided into 26 sectors numbered 1-26 (Figure 1-9). Each
sector contains two major fields: the header field and the data field (Figure 1-10).
LL.E.D TRAr,SDUCER OUTPUT
HARD
INDEX
1
MARK
I
---------------~(A
L.
I
PRE IN bEX
GA P
320 B
SECTOR
" 26
~"
...
SECTOR
SECTOR
SECCTOR
SECTOH
" 1
" 2
=3
,,~
ins
t
SOFT INDEX MARK
I
1
1 BYTE
_ROTATIOI,
Figure 1-9
Track Format (Each Track)
HEADER FIELD
r---
DATA FIELD
r -_ _ _ _ _ _ _ _
----"---
~A~
_______
~
,
«
«
I>L
0(/1
~o
INTER·
-U1
SECTOR GAP LLW
ul26 BYTES
z>l's OR 0'5
>-'"
(f) ' "
o
o
(f)
rr
Ul
«
w
rr
::;
o
o
«
~
w
0:
""w
Ow
ul-
«>-
0:'"
01-
'"
w
: t;:
p~
w
HEADER
CRC
2 BYTES
Iw
-'W
ill
f-
o >-
0: CD
«>-
128'0 BYTES OF FM
DATA
OR
256, 0 BYTES OF MFM
(MODIFIED)
DATA
DATA
CRC
2 BYTES
0-
« >L
««
1--
f-O:
0::;
~--j
t
l_
PREAMBLE
11 BYTES-l.-j
10 GAP
l's OR O's
WRITE GATE TURN OFF
FOR WRITE OF PRECEEDING
DATA FIELD
-ROTATION
Figure 1-10
l-
6 BYTES
WRITE GATE TURN ON
FOR WRITE OF NEXT
DATA FIELD
Sector Format (Each Sector)
1.5.3.1 Header Field Description - The header field is broken into seven bytes (eight bits/byte) of
in formation and is preceded by a field of at least six bytes of zeros for synchronization. The header and
its preamble are always recorded in FM.
!.
Byte No. I: ID Address Mark - This is a unique stream offlux reversals (nota string of data
bits) that is decoded by the controller to identify the beginning of the header field, (Data ==
FE hex, clock = C7 hex.)
2.
Byte No, 2: Track Address - This is the absolute (0-1148) binary track address. Each sector
contains track address information to identify its location on 1 of the 77 tracks.
3.
Byte No, 3: - Zeros
1-12