Download Installation and operating instructions

EN
eLOCK eXpress
Installation and operating instructions
11/2014
APS Comfort system for flush door
Step
Activity
13
Outside:
To ensure that the profile
cylinder adapter fits into the lock
easily, push the heat-shrinkable
sleeves of the antenna cables
carefully until they are just in
front of the respective connector.
14
Outside:
Insert the antenna cable into the
lengthwise slot of the profile
cylinder adapter. The slanted
face of the profile cylinder
adapter must point towards the
inside of the door.
15
Caution
Risk of damage to property
When inserting the profile
cylinder adapter into the lock,
ensure that the motor cable is
laid below the slanted face of the
profile cylinder adapter.
Ensure that the antenna cable is
not crushed or clamped.
There is a risk of the motor or
antenna cable being sheared off.
Push the profile cylinder adapter
together with the antenna cable
carefully into the lock from the
outside.
16
Use the M5x80 forend screw to
fasten the profile cylinder
adapter and remove the
installation aid.
17
Guide the antenna cable through
the rose cap and fix it onto the
rose. (Refer to the
manufacturer's installation
instructions)
Figure
OPERTIS  21