Download Quantum DAT 432/864 Loader User's Guide
Transcript
4. Operating Your Autoloader This chapter describes how to operate your autoloader. Topics in this chapter are: • “Using the Appropriate Media” on page 28 • “Starting the Autoloader” on page 29 • “Applying Labels” on page 30 • “Loading a Cartridge” on page 30 • “Ejecting a Cartridge or Magazine” on page 31 • “Write-Protecting a DAT Cartridge and Magazine” on page 33 • “Cleaning the Tape Path” on page 34 • “Preparation for Shipping” on page 35 Using the Appropriate Media The DDS-4 and DAT 72 autoloaders are designed to use datagrade DAT cartridges, such as those listed below. NOTE: 60-meter DAT cartridges cannot be used with these autoloaders. The use of 90-meter DAT cartridges is not recommended for these products. Table 4. Matching Drives with the Media They Support Media Tape Length DDS-4 Drives DAT 72 Drives DDS-2 120 meters, 4-Gbyte uncompressed capacity P DDS-3 125 meters, 12-Gbyte uncompressed capacity P P DDS-4 150 meters, 20-Gbyte uncompressed capacity P P DAT 72 170 meters, 36-Gbyte uncompressed capacity P 28