Download Quantum DAT 432/864 Loader User's Guide

Transcript
4. Operating Your Autoloader
This chapter describes how to operate your autoloader.
Topics in this chapter are:
•
“Using the Appropriate Media” on page 28
•
“Starting the Autoloader” on page 29
•
“Applying Labels” on page 30
•
“Loading a Cartridge” on page 30
•
“Ejecting a Cartridge or Magazine” on page 31
•
“Write-Protecting a DAT Cartridge and Magazine” on page 33
•
“Cleaning the Tape Path” on page 34
•
“Preparation for Shipping” on page 35
Using the Appropriate Media
The DDS-4 and DAT 72 autoloaders are designed to use datagrade DAT cartridges, such as those
listed below.
NOTE: 60-meter DAT cartridges cannot be used with these autoloaders. The use of 90-meter
DAT cartridges is not recommended for these products.
Table 4. Matching Drives with the Media They Support
Media
Tape Length
DDS-4 Drives
DAT 72 Drives
DDS-2
120 meters, 4-Gbyte
uncompressed capacity
P
DDS-3
125 meters, 12-Gbyte
uncompressed capacity
P
P
DDS-4
150 meters, 20-Gbyte
uncompressed capacity
P
P
DAT 72
170 meters, 36-Gbyte
uncompressed capacity
P
28