Download Panasonic Arbitrator 360 Operating Instructions

Setup (continued)
Item
Factory-Preset
Init Settings after power ON
Description
Initial settings upon power-on
Init Preset Select*1 Preset1
Initial Preset setting
Setting values: Preset1, Preset2, Preset3, LAST*2
Init Video Out 1*1
Setting of the throughout video signal to the [VIDEO OUT 1] connector
Setting values: CAM1, CAM3, Video OUT2, LAST*2
VIDEO_OUT 2
Force Classify
Force Classify
Classify information setting
DISABLE
Addition of classify information
Setting values: DISABLE (No addition)
ENABLE (Addition permitted)
FORCE (Forcible addition)
Storage Capacity Warning
Remaining
Recordable
Time[min]
60
A warning sounds when the remaining recordable time becomes
shorter than the value set here.
Setting values: 30, 60, 90 (minutes)
Warning sound
OFF
Select if a short beep is to sound twice every 30 seconds when the
remaining recordable time becomes shorter than the set value.
Setting values: ON, OFF
*1 Depending on the settings of the Video Allocation
screen, some items may not be displayed.
*2 The setting upon the last power-off will be restored
when the camera is turned on. If the Memory Card
Video Recorder is not turned off properly, the setting
data upon power-off may not be stored properly.
125