Download Panasonic Arbitrator 360 Operating Instructions

Description of the Screen Displays (continued)
Auto Power OFF
Classify
ⓐ
ⓐ
ⓑ
ⓒ
ⓓ
ⓑ
Power Off Time[min]
Select the time required from the ACC is turned off
up to the Memory Card Video Recorder is turned
off.
Classify Tag List
Setting values: 0, 10, 20, 30, 60, 90, 120, 180
minutes, After Upload
The names of the registered classify tags are
displayed. Up to 50 classify tags can be registered.
Apply To
Force Classify
When Power Off Time is set to After Upload, select
which one's uploading is to be observed.
Set if the user is forced to add classify information
at the end of recording.
Setting values: APPLICATION ONLY, LAPTOP
ONLY, APPLICATION AND LAPTOP
Setting values: DISABLE, ENABLE, FORCE
GPO
Action Specified
When Power Off Time is set to After Upload, select
which action is to be taken by the subject (s) after
uploading is completed.
ⓐ
Setting values:
Setting values depend on the setting of Apply To.
APPLICATION ONLY: Close
LAPTOP ONLY: Lock Stand by
APPLICATION AND LAPTOP: Lock, Log off,
Shutdown, Stand by
GPO1 Signal, GPO2 Signal, GPO3 Signal
Select if the recording and recording error statuses
are output to GPO 1, 2, and 3.
Timeout[s]
Setting values:
When Power Off Time is set to After Upload, select
the time required from the specified action is taken
till the Memory Card Video Recorder is turned off.
GPO1 Signal, GPO2 Signal: OFF, REC,
ERROR, REC+ERROR
Setting values: 30, 60, 90, 120 seconds
GPO3 Signal: OFF, REC
Note
Note
When the vehicle’s ignition switch is set to ACC-OFF with
Upload Mode on the File Transfer screen in Config setup
set to MANUAL and Power Off Time on the Rec/Play
screen set to AUTO, uploading will start automatically.
The functions of GPO1, GPO2, and GPO3 can be
changed with settings. GPO4 always outputs the power
status of the recorder, and has no setting.
43